Dr Beckmann. Oven And Grill Power Gel 375Ml
Ingredient/Nutrition
Ingredients
- Contains among other ingredients:
- Less than 5% Non-Ionic Surfactants, Anionic Surfactants
Usage
Preparation And Usage
DIRECTION FOR USE: Shake well before use. Turn nozzle to ON position.
QUICK CLEAN: HOT OVEN.
Heat oven to approximately 50°C then switch off. For fan assisted ovens ensure that the fan has come to a complete stop before spraying active gel.
Evenly spray the active gel onto the surfaces of the oven. Close door.
Leave to work for 30-60 minutes depending on how soiled the oven is.
Wash out oven thoroughly with clean cloth and hot soapy water.
CLEANING COLD OVEN.
Evenly spray the active gel onto the surfaces of the oven. Close door.
Leave to work for 2-4 hours. For extremely soiled ovens leave overnight or for up to 24 hours.
Wash out oven thoroughly with clean cloth and hot soapy water.
Always clean nozzle after use and turn to STOP position.
IMPORTANT INFORMATION.
Do not use on self cleaning ovens. Do not spray into ventilation system, slits or fans. Do not spray on printed, lacquered, aluminium or plastic surfaces. If in doubt refer to the manufacturers' manual. If nozzle becomes blocked, simply place upside down and soak in hot water. Avoid contact with eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
QUICK CLEAN: HOT OVEN.
Heat oven to approximately 50°C then switch off. For fan assisted ovens ensure that the fan has come to a complete stop before spraying active gel.
Evenly spray the active gel onto the surfaces of the oven. Close door.
Leave to work for 30-60 minutes depending on how soiled the oven is.
Wash out oven thoroughly with clean cloth and hot soapy water.
CLEANING COLD OVEN.
Evenly spray the active gel onto the surfaces of the oven. Close door.
Leave to work for 2-4 hours. For extremely soiled ovens leave overnight or for up to 24 hours.
Wash out oven thoroughly with clean cloth and hot soapy water.
Always clean nozzle after use and turn to STOP position.
IMPORTANT INFORMATION.
Do not use on self cleaning ovens. Do not spray into ventilation system, slits or fans. Do not spray on printed, lacquered, aluminium or plastic surfaces. If in doubt refer to the manufacturers' manual. If nozzle becomes blocked, simply place upside down and soak in hot water. Avoid contact with eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
