Elbow Grease Oven Cleaner Set
Descriptions
Features
- Deep Cleans
- Easy to Use Formula
- Ovens, Grills, Racks
- The Only Cleaner You'll Ever Need
- Fume Free
Ingredient/Nutrition
Ingredients
- Contains amongst other ingredients: 5 - 15% Sodium Hydroxide, Anionic Surfactants <5% Amphoteric Surfactants
Usage
Preparation And Usage
Directions for Use
To begin, refer to the oven cleaning manual/instructions to ensure the product is suitable for your oven. Please read through all the safety instructions and information on the box prior to use. Inspect the gloves and bag provided and do not use if they are damaged in any way.
Ensure the bag has no leaks by filling with water prior to use. Empty water out before use. Gloves must be worn at all times and arms and wrists should be covered. Gloves are provided for convenience only, use of long protective gloves is recommended. Please refer to manufacturer's instructions for suitability.
To Clean Racks and Grills
Carefully place up to two racks into the bag provided, taking care not to puncture or tear the bag. Add approximately 2/3 of the oven cleaner and seal the bag, dispelling as much air as possible. Fold the bag around the rack(s) and gently tilt the bag until the racks are coated with the cleaning solution and leave for 2 hours, stand it upright with the seal at the top. Leave in a suitable and safe place out of reach of children and away from surfaces that could be damaged by any leakage. After 2 hours tilt the bag again, to re-coat the rack(s) and soak for a further 4 hours. For best results, leave overnight. For vitreous enamel leave for no more than 2 hours. To remove the rack(s), open the bag and pull downwards at the sides. Do not reach inside. Remove the rack(s) and rinse carefully with hot soapy water.
To Clean Inside the Oven
Pour some of the remaining solution into the centre of the oven.
Apply to the areas to be cleaned using a cloth / sponge.
Leave to soak for at least 4 hours, for best results leave overnight, avoid contact with the oven door seals, trims, glass panel, pilot light or heating and fan elements. Protect surfaces around the oven.
Remove residue with a cloth / sponge and rinse with hot soapy water.
A second application may be required depending on build up.
Do:
- Check surface material before applying and refer to manufacturer's instructions. If in doubt do not use.
- Use on most common stainless steel and enamel surfaces.
- Protect surfaces from any leakage.
- Ventilate the room during and after use.
- Rinse and dry hands after use.
- Store the solution at room temperature.
- Always wear a suitable chemical resistant protective glove when handling the product and cover your arms.
To begin, refer to the oven cleaning manual/instructions to ensure the product is suitable for your oven. Please read through all the safety instructions and information on the box prior to use. Inspect the gloves and bag provided and do not use if they are damaged in any way.
Ensure the bag has no leaks by filling with water prior to use. Empty water out before use. Gloves must be worn at all times and arms and wrists should be covered. Gloves are provided for convenience only, use of long protective gloves is recommended. Please refer to manufacturer's instructions for suitability.
To Clean Racks and Grills
Carefully place up to two racks into the bag provided, taking care not to puncture or tear the bag. Add approximately 2/3 of the oven cleaner and seal the bag, dispelling as much air as possible. Fold the bag around the rack(s) and gently tilt the bag until the racks are coated with the cleaning solution and leave for 2 hours, stand it upright with the seal at the top. Leave in a suitable and safe place out of reach of children and away from surfaces that could be damaged by any leakage. After 2 hours tilt the bag again, to re-coat the rack(s) and soak for a further 4 hours. For best results, leave overnight. For vitreous enamel leave for no more than 2 hours. To remove the rack(s), open the bag and pull downwards at the sides. Do not reach inside. Remove the rack(s) and rinse carefully with hot soapy water.
To Clean Inside the Oven
Pour some of the remaining solution into the centre of the oven.
Apply to the areas to be cleaned using a cloth / sponge.
Leave to soak for at least 4 hours, for best results leave overnight, avoid contact with the oven door seals, trims, glass panel, pilot light or heating and fan elements. Protect surfaces around the oven.
Remove residue with a cloth / sponge and rinse with hot soapy water.
A second application may be required depending on build up.
Do:
- Check surface material before applying and refer to manufacturer's instructions. If in doubt do not use.
- Use on most common stainless steel and enamel surfaces.
- Protect surfaces from any leakage.
- Ventilate the room during and after use.
- Rinse and dry hands after use.
- Store the solution at room temperature.
- Always wear a suitable chemical resistant protective glove when handling the product and cover your arms.
