Elbow Grease Scrub Mate Pink 1pk
Descriptions
Features
- Deep Cleans
- Easy to Use Formula
- Racks
- Grills
- The only Cleaner You'll Ever Need
- Fume Free
Ingredient/Nutrition
Ingredients
- Contains amongst other ingredients: 5 - 15% Sodium Hydroxide, Anionic Surfactants <5% Amphoteric Surfactants
Usage
Preparation And Usage
Directions for Use
To begin, refer to the BBQ cleaning manual/instructions to ensure the product is suitable for your BBQ. Please read through all the safety instructions and information on the box prior to use. Inspect the gloves and bag provided and do not use if they are damaged in any way. Gloves must be worn at all times and arms and wrists should be covered. Gloves are provided for convenience only, use of long protective gloves is recommended. Please refer to manufacturer's instructions for suitability. Ensure the bag has no leaks by filling with water prior to use. Empty water out before use.
To clean racks and grills
Carefully place up to two racks into the bag provided, taking care not to puncture or tear the bag, especially when using circular racks. Add the whole bottle of BBQ Rack and Grill Cleaner and seal the bag, dispelling as much air as possible. Fold the bag around the rack(s) and gently tilt the bag until the racks are coated with the cleaning solution and leave for 2 hours, stand it upright with the seal at the top. Leave in a suitable and safe place out of reach of children and away from surfaces that could be damaged by any leakage. After 2 hours tilt the bag again, to re-coat the rack(s) and soak for a further 4 hours. For best results, leave overnight. For vitreous enamel leave for no more than 2 hours.
To remove the rack(s), open the bag and pull downwards at the sides. Do not reach inside. Remove the rack(s) and rinse carefully with hot soapy water.
Disposal: Partially fill the bag with water, seal and tilt so the solution collects in one bottom corner. Cut off the other corner of the bag and then tilt back to allow the residue to be safely poured away down the sink.
Disposal of the bottle: Simply rinse the bottle with water and dispose of in a safe way. Recycle where allowed.
Do:
- Check surface material before applying and refer to manufacturer's instructions. If in doubt do not use.
- Use on most common stainless steel and enamel surfaces.
- Protect surfaces from leakage.
- Ventilate the room during and after use. Preferably use outdoors.
- Rinse and dry hands after use.
- Store the solution at room temperature.
- Always wear a suitable chemical resistance protective glove when handling the product.
-Cover your arms.
Do Not:
- Use to clean the inside / outside of the Barbeque. Only to be used on racks and grills.
- Use on aluminium, zinc, copper, tin, painted, damaged, self-cleaning BBQ or non-stick surfaces.
- Leave the bag or treated areas unattended or where children will come into contact with it.
- Shake the bag containing the BBQ Rack and Grill cleaner.
- Place hot or sharp- edged racks in the cleaning bag.
- Mix with any other product.
- Eat or drink whilst using this product.
To begin, refer to the BBQ cleaning manual/instructions to ensure the product is suitable for your BBQ. Please read through all the safety instructions and information on the box prior to use. Inspect the gloves and bag provided and do not use if they are damaged in any way. Gloves must be worn at all times and arms and wrists should be covered. Gloves are provided for convenience only, use of long protective gloves is recommended. Please refer to manufacturer's instructions for suitability. Ensure the bag has no leaks by filling with water prior to use. Empty water out before use.
To clean racks and grills
Carefully place up to two racks into the bag provided, taking care not to puncture or tear the bag, especially when using circular racks. Add the whole bottle of BBQ Rack and Grill Cleaner and seal the bag, dispelling as much air as possible. Fold the bag around the rack(s) and gently tilt the bag until the racks are coated with the cleaning solution and leave for 2 hours, stand it upright with the seal at the top. Leave in a suitable and safe place out of reach of children and away from surfaces that could be damaged by any leakage. After 2 hours tilt the bag again, to re-coat the rack(s) and soak for a further 4 hours. For best results, leave overnight. For vitreous enamel leave for no more than 2 hours.
To remove the rack(s), open the bag and pull downwards at the sides. Do not reach inside. Remove the rack(s) and rinse carefully with hot soapy water.
Disposal: Partially fill the bag with water, seal and tilt so the solution collects in one bottom corner. Cut off the other corner of the bag and then tilt back to allow the residue to be safely poured away down the sink.
Disposal of the bottle: Simply rinse the bottle with water and dispose of in a safe way. Recycle where allowed.
Do:
- Check surface material before applying and refer to manufacturer's instructions. If in doubt do not use.
- Use on most common stainless steel and enamel surfaces.
- Protect surfaces from leakage.
- Ventilate the room during and after use. Preferably use outdoors.
- Rinse and dry hands after use.
- Store the solution at room temperature.
- Always wear a suitable chemical resistance protective glove when handling the product.
-Cover your arms.
Do Not:
- Use to clean the inside / outside of the Barbeque. Only to be used on racks and grills.
- Use on aluminium, zinc, copper, tin, painted, damaged, self-cleaning BBQ or non-stick surfaces.
- Leave the bag or treated areas unattended or where children will come into contact with it.
- Shake the bag containing the BBQ Rack and Grill cleaner.
- Place hot or sharp- edged racks in the cleaning bag.
- Mix with any other product.
- Eat or drink whilst using this product.
